PC3000 Training

[yohayon]

Hi,
AceLabs provides 3 training courses for HDD/Flash/Monolith Recovery with PC3000. I'm starting out in the data recovery world and want to know if this online training would be worth it if I do not have or plan to get PC3000 in the near future due to costs. Each training course costs around $850 except monolith which is more $ I'm sure and onsite. I currently use DFL-PCIe 4X Data Recovery Express and also Deepspar USB Stabilizer. Ive attached the course overviews. Thanks

Attachments

Monolith_Expert.pdf

(1.04 MiB) Downloaded 330 times

PC-3000 Flash Data Recovery Basic Online Training.pdf

(489.27 KiB) Downloaded 300 times

PC-3000 HDD Data Recovery Basic Online Training.pdf

(1.67 MiB) Downloaded 322 times

[pclab]

Well, that's a very good start, if you don't know anything about this area.
Of course, if you can take them (money wise), I think you should go for it.

[fzabkar]

If you're totally new to flash recovery, then perhaps you could read this primer before attending the course(s):

NAND Flash Data Recovery Cookbook (by Igor Sestanj):
http://adreca.net/NAND-Flash-Data-Recovery-Cookbook.pdf

[melvin]

I would skip the basic one on flash. You'll get more from YT videos.

[MISU]

If you're totally new to flash recovery, then perhaps you could read this primer before attending the course(s):

NAND Flash Data Recovery Cookbook (by Igor Sestanj):
http://adreca.net/NAND-Flash-Data-Recovery-Cookbook.pdf

Thank you so much fzabkar
I am looking for exactly the same.

[HaQue]

and the 2 VNR books at rusolut.com and all their knowledgebase material. They also do training. Anything Flash is going to cost a bit, can be tough for starters

[jangistech]

never buy pc3000 flash even thier training
1 day online cost me 650euro and it worth only 50euro
it was 4 hours the first two hours was introducing and general things
the second starts some vedios which was uploaded in thier youtube channel and then starts 3 cases no more
I hope some one could told me that befor wasting that amount of money